Parc de Lledoner 6,028 SF Industrial Building Reus, Tarragona 43204 $682,987 ($113.31/SF)

Industrial warehouse with a ground floor area of 479 m2 and a closed mezzanine of 81 m2, accessible via an interior staircase. It features a front and a rear yard, each approximately 80 m2. The building is designed with a type A-42 B metal structure, consisting of columns, lintel beams, roof purlins, and bracing elements. The foundation is constructed with reinforced concrete footings and beams H-25. The exterior enclosures have different finishes depending on their location. The main facade is built with 20x20x40 cm Split face block, while the rear enclosure uses white face block of the same dimensions. The separations between adjacent warehouses are made with reinforced concrete panels, and the mezzanine enclosure is also executed with white face block. The roof is made of 0.6 mm thick corrugated sheet, with polycarbonate skylights arranged in an alternating pattern to enhance natural light entry. Below the sheet, an alumisol type insulator of 1.2x1.2x0.5 m is placed, covering the structural metal elements to ensure compliance with fire regulations. The floor slab is made of H-20 reinforced concrete, with a thickness of 15 cm, finished with a helicopter trowel in gray color. Beneath it is a 15 cm layer of leveled, watered, and compacted artificial gravel, along with a 20x15 cm and 4 mm thick welded mesh. The perimeter sidewalk, one meter wide, maintains the same characteristics. The rear areas and access points feature grooved concrete pavement with mesh, while the intermediate spaces between warehouses are covered with soil and stone. The rainwater drainage system consists of 160 mm diameter PVC downspouts, with corresponding elbows, special pieces, and fastening hardware, connected to the general network manholes of the industrial park. The sanitation network is separate, with an independent layout from the exterior manhole to the end of the ground floor, allowing the placement of sanitary facilities at different points as needed. The exterior carpentry is made of lacquered aluminum, with windows in blue on the outside and white on the inside. The main doors are lacquered metal in blue: a 5x5 m overhead door on the front facade and a 4x4 m door at the rear. The pedestrian access door measures 2.1x1 m, and the one connecting the ground floor with the mezzanine is lacquered aluminum in white. The exterior fence gate is sliding and matches the enclosure design, in accordance with the technical specifications of the Reus City Council. The mezzanine is intended for office or storage use. Its enclosures are built with white face block and feature windows and doors of lacquered aluminum in white. The floor, both on the ground floor and the first floor, is polished concrete with a helicopter trowel in gray color. The height to the top of the columns is 6.5 meters, with a 15% slope from the ridge to the ends of the structure.

Industrial warehouse with a ground floor area of 479 m2 and a closed mezzanine of 81 m2, accessible via an interior staircase. It features a front and a rear yard, each approximately 80 m2. The building is designed with a type A-42 B metal structure, consisting of columns, lintel beams, roof purlins, and bracing elements. The foundation is constructed with reinforced concrete footings and beams H-25. The exterior enclosures have different finishes depending on their location. The main facade is built with 20x20x40 cm Split face block, while the rear enclosure uses white face block of the same dimensions. The separations between adjacent warehouses are made with reinforced concrete panels, and the mezzanine enclosure is also executed with white face block. The roof is made of 0.6 mm thick corrugated sheet, with polycarbonate skylights arranged in an alternating pattern to enhance natural light entry. Below the sheet, an alumisol type insulator of 1.2x1.2x0.5 m is placed, covering the structural metal elements to ensure compliance with fire regulations. The floor slab is made of H-20 reinforced concrete, with a thickness of 15 cm, finished with a helicopter trowel in gray color. Below it is a 15 cm layer of leveled, watered, and compacted artificial gravel, along with a 20x15 cm and 4 mm thick welded mesh. The perimeter sidewalk, one meter wide, maintains the same characteristics. The rear areas and access points have grooved concrete pavement with mesh, while the intermediate spaces between warehouses are covered with soil and stone. The rainwater drainage system consists of 160 mm diameter PVC downspouts, with corresponding elbows, special pieces, and fastening hardware, connected to the general network manholes of the industrial park. The sanitation network is separate, with an independent layout from the exterior manhole to the end of the ground floor, allowing the placement of sanitary facilities at different points as needed. The exterior carpentry is made of lacquered aluminum, with windows in blue on the outside and white on the inside. The main doors are lacquered metal in blue: a 5x5 m overhead door on the front facade and a 4x4 m door at the rear. The pedestrian access door measures 2.1x1 m, and the one connecting the ground floor with the mezzanine is lacquered aluminum in white. The exterior fence gate is sliding and matches the enclosure design, in accordance with the technical specifications of the Reus City Council. The mezzanine is intended for office or storage use. Its enclosures are built with white face block and feature windows and doors of lacquered aluminum in white. The floor, both on the ground floor and the first floor, is polished concrete with a helicopter trowel in gray color. The height to the top of the columns is 6.5 meters, with a 15% slope from the ridge to the ends of the structure.